Carbon Fiber Curved Arm High-Speed Barrier Gate KT-KL511
Technical Parameters
Input Voltage of Switching Power Supply: AC220V±10%, 50Hz
Input Voltage of Controller: DC24V±10%
Chassis Material: SPCC Carbon Steel
Movement Type: Ultra High-Speed Movement
Motor Power: ≤240W
Applicable Rod Length: Curved arm round rod ≤ 4m
Rod Lifting/Lowering Speed: Adjustable in 0.6 seconds
Anti-Collision Rod Release: Supported
Obstacle Return Function: Supported
Rod Lifting During Power Failure: Supported (24V battery required)
Weight: Gross Weight 50KG
Service Life: 10 million operations
Remote Control Distance: ≥50m (open area without interference)
Protection Level: IP54
Operating Temperature: -25℃~70℃
Operating Humidity: ≤95% non-condensing
Chassis Color: Black/Yellow/Gold/Silver
Dimensions: 335×285×967mm
Function Configuration
Two-stage planetary gear drive, efficient and reliable.
Adjustable slow start and slow down.
Adjustable limit angle.
Supports mobile phone Bluetooth debugging function.
Automatic rod lifting in case of power failure.
0.6-second lifting/lowering speed adjustable.
Supports anti-collision rod release, rod not damaged upon collision.
Input functions for vehicle anti-crushing signals from loop detector, radar and IO port.
IO port signal input function for lift, lower and stop.
Counting (vehicle fleet) function.
IO port output function for LED lights.
IO port signal output function for traffic lights.
Normally open and normally closed signal output function when lifting/lowering is in place.
RS485 network communication output function.
Delayed rod lowering function.
Obstacle return function.
Controller fault code display, simple and easy maintenance.
IO port one-key cycle lift function.
Loop detector normally open and normally closed function.
One vehicle one rod anti-toll evasion function.
Fire linkage signal input function.
IO port close signal input function.
24V storage battery input function.
