Accessible Barrier Gate KT-JSDW03
Technical Parameters
Cabinet Material: 304 stainless steel (national standard 1.5mm thickness, brushed finish)
Passage Width: 900-1200mm (accessible standard, suitable for wheelchairs / strollers)
Passage Direction: One-way / two-way adjustable
Passage Speed: ≤0.8m/s
Drive Power: DC 24V brushless DC motor
Rated Power: Static ≤30W, dynamic ≤80W, peak ≤150W
Communication Interface: RS485, TCP/IP, Wiegand 26/34 (expandable)
Communication Protocol: Supports SDK, HTTP, MQTT, ONVIF
Infrared Detection: 18 pairs of anti-pinch infrared sensors, full-range anti-tailgating and anti-pinch
Continuous Trouble-Free Operation Times: ≥5 million times
Passage Efficiency: 120-150 people per minute for dual-channel
Limit Accuracy: ±1° encoder precise limit
Fire Linkage: Supports fire signal input, automatic door opening during power outage
Operating Voltage: AC 220V±10%, 50Hz
Operating Temperature: -30℃~+70℃ (wide temperature design, suitable for indoor and outdoor use)
Operating Humidity: 10%~95% RH, non-condensing
Cabinet Dimensions: 1100×200×1150mm (L×W×H, customizable)
Function Configuration
Identity Verification: Support card swiping, QR code, face recognition, fingerprint, ID card, etc. (expandable)
Accessible Mode: Support delayed door opening, normally open mode, suitable for special groups
Anti-Tailgating/Anti-Pinch: Dual anti-pinch (infrared + machinery), tailgating alarm
Power-Off Door Opening: Support automatic door opening during power outage, meeting fire evacuation requirements
Voice Prompt: Built-in multi-language voice announcement, passage status prompt
Status Indicator: Passage indicator light (red/green), visual passage status
Remote Management: Support PC/mobile remote control, data statistics, fault alarm
Offline Operation: Support offline passage during network disconnection, automatic data synchronization after reconnection
